Turnouts

It is always a big thing to remotly control turnouts on model railway. Now it is possible also in wooden world of trains.

 

This 3D printed model contains actuator module with small N20 motor which changes the direction of turnout. Actuator can be connected from either side so it turns to right or to the left.

Besides the printed parts, you need this:

• Motor N20
• PCB
• Terminal connector
• 2 microswitch
• 2 diode 1N4001
• 3 screws 2.5x10

 

You can buy this parts here: https://www.neotinker.sk/turnout-kit-analog/ . There is an option to buy PCBs only, all other electronic components are  available elsewhere. 

All other parts are 3D printed. You have to print them yourself or use 3D print service. You can download them here  https://www.thingiverse.com/thing:6651468.